Универсален USB програматор Xeltek SuperPro 6100N

Features:
- SuperPro 6100N is a cost-effective, reliable, and high-speed universal chip programmer. It is designed to communicate using USB 2.0 port for development requirement and can also work in standalone mode (without connecting to a PC) for production requirement. It has the largest device support count in the programming industry with 144 pin drivers to support high pin count chips.
- SuperPro 6100N is equipped with a built-in universal 144 pin driver to accommodate large pin count devices. One universal adapter accommodates all devices with the same package type.
- SuperPro 6100N programmer is also designed for IC testing of various devices such as TTL, CMOS Logic (74/4000 series), and SRAM memory devices.
- Operate multiple units to construct a concurrent multi-programming system. Cluster 1-15 units for flexible volume production.
- Support devices with Vcc from 1.2V - 5V.
- Support files up to 256 GB.
- Over-current and over-voltage protection for safety of the chip and programmer hardware.
- Only IC manufacturer approved programming algorithms used for high reliability.
- Vcc verification (at +5% ~ -5% and +10% ~ -10%) enhances programming reliability.

Devices supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU

Package types supported: DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON, EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN etc.

Stand-alone memory: Compact FLASH Card

Power supply: AC/DC Adapter; Input AC 100V-240V 50/60Hz; Output DC 12V/1.5A

Dimensions / Weight: Main unit - 148(L) x 216(W) x 94(H) mm / 1.6 Kg

Package Contents:
1 x USB Interfaced Universal Programmer Xeltek SuperPro 6100N
1 x AC/DC Power Adapter
1 x USB Cable
1 x CD with Software and User Manual